catalogs

Multi-piece: Three-piece ;
Supplementary Article/Supplementary Info: with clutch pressure plate ;
Supplementary Article/Info 2: with clutch plate ;
Supplementary Article/Info 2: with releaser ;
Diameter [mm]: 180 mm ;
Number of Teeth: 18 ;
ArticleState: Normal ;
Technical Information: (dreiteilig,mit Kupplungsdruckplatte,mit Kupplungsscheibe,mit Ausrücklager)

Inner diameter [mm]: 125 mm ;
Outer diameter [mm]: 180 mm ;
Number of Teeth: 18 ;
Weight [kg]: 3,27 kg ;
Centering Diameter [mm]: 19 mm ;
ArticleState: Normal ;
General Information: Die von uns gelieferten Produkte sind ausschließlich dem bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf nur durch geschultes Fachpersonal erfolgen. Produkte werden in der Regel ohne Montageanleitung geliefert.

Number of Teeth: 18 ;
Outer diameter [mm]: 180 mm ;
Bolt Hole Circle Ø [mm]: 203 mm ;
Supplementary Article/Info 2: with bearing(s) ;
Multi-piece: Three-piece ;
ArticleState: Normal

Diameter [mm]: 180 mm ;
Number of Teeth: 18 ;
Fitted Diameter [mm]: 203 mm ;
ArticleState: Normal

Diameter [mm]: 180 mm ;
Inner diameter [mm]: 108 mm ;
Fitted Diameter [mm]: 216 mm ;
Centering Diameter [mm]: 20 mm ;
Number of Teeth: 18 ;
ArticleState: Normal

Specification: 1909956 ;
Diameter [mm]: 180 mm ;
Number of Teeth: 18 ;
Bolt Hole Circle Ø [mm]: 19 mm ;
Specification: 180x18x19,1 ;
ArticleState: Normal

Diameter [mm]: 180 mm ;
Hub Profile: 19 x 18 ;
Supplementary Article/Supplementary Info: with clutch pressure plate ;
Supplementary Article/Info 2: with clutch plate ;
Supplementary Article/Info 2: with releaser ;
ArticleState: Normal

Weight [kg]: 3,29 kg ;
Packaging length [cm]: 29 cm ;
Packaging width [cm]: 30 cm ;
Packaging height [cm]: 7 cm ;
Diameter [mm]: 180 mm ;
Inner diameter [mm]: 108 mm ;
Fitted Diameter [mm]: 216 mm ;
Centering Diameter [mm]: 20 mm ;
Number of Teeth: 18 ;
ArticleState: Normal

Diameter [mm]: 180 mm ;
ArticleState: not available

Diameter [mm]: 180 mm ;
Hub Profile: 19.1 ;
Number of Teeth: 18 ;
Supplementary Article/Info 2: with bearing(s) ;
ArticleState: Normal

Diameter [mm]: 180 mm ;
Number of Teeth: 18 ;
for components see parts list: ;
ArticleState: Normal

New Part: ;
Diameter 1 [mm]: 180 mm ;
Diameter 2 [mm]: 180 mm ;
Number of Teeth: 18 ;
Supplementary Article/Info 2: with releaser ;
Weight [kg]: 3,145 kg ;
ArticleState: No longer supplied by manufacturer ;
Technical Information: 3-Komponenten-Kit (Druckplatte & Scheibe & Ausrücklager)